Key factors affecting prediction of seismic pore water pressures in silty sands based on damage parameter

The paper provides insight into factors affecting the prediction of seismic pore-water pressure build up in clean sands and sand–silt mixtures for modeling purposes. Laboratory pore pressure measurements were conducted using stress-controlled undrained cyclic simple shear (CSS) tests carried out on both reconstituted and undisturbed specimens of silty sands under different initial conditions (density state, effective vertical stress, initial fabric and fines content). Test results were interpreted by using a damage concept-based model which is actually implemented for clean sands in non-linear time domain site response analysis codes. In the present work, such a model was properly modified for sands having fines contents higher than 35%. The general applicability of the modified procedure for predicting pore water pressure response of silty sands under irregular shear stress loading using data from stress-controlled CSS tests was also verified and all factors affecting calibration parameters of the model were throughly analyzed.